Samsung Washer Error Codes – Troubleshooting Guide from Repair Experts

A Samsung washing machine is attempting to stop major internal damage when it stops in the middle of a cycle and shows an error code. While some issues are simple to resolve at home, others call for expert Samsung washer repair in order to prevent expensive malfunctions. The most frequent Samsung washer problem codes, their causes, and the proper way to fix them are all covered in the technician-approved guide below.

Why Samsung Washers Display Error Codes

Samsung washers rely on sensors to monitor:

• Water intake
• Drain speed
• Drum balance
• Temperature
• Electrical signals

The washer shuts down and shows a fault code if it works outside of its regular parameters. Knowing the meaning makes it easier to decide whether to call for washing machine repair or try a quick fix.

Water-Related Error Codes

1E / 1C – Water Level Detection Problem

Indicates inaccurate water level readings caused by pressure issues or sensor malfunction.

Recommended action:

• Check inlet hose condition
• Verify water pressure
• Reset the washer

If unresolved, sensor replacement by a Samsung washer repair technician is required. 4E / 4C / nF – No or Low Water Supply Usually caused by closed taps, clogged inlet filters, or incorrect hose connections. Fix:

• Fully open water valves
• Clean hose mesh filters
• Restart the cycle

Drain & Pump Error Codes

5E / 5C / SE

Water cannot exit the drum correctly.

Technician insight:

One of the most common Samsung washer repair calls is caused by damaged drain pumps or blocked filters.

Motor & Spin System Errors

3E / 3C

Indicates motor control problems or drum overload.

Important:

Repeated motor errors should not be ignored, as they can damage the control board.

UE / Ub

Unbalanced load detected during spin.

Fix:

• Redistribute laundry
• Level the washer
• Avoid washing bulky items alone

Door Lock Error Codes

dE / dC / LO

The washer cannot confirm the door is locked.

Common repair causes:

• Broken door latch
• Faulty lock sensor

Door lock failures almost always require professional Samsung washing machine repair.

Leak Detection Error Codes

LC / LE / LC1

The washer has detected water where it shouldn’t be.

Check for:

• Hose leaks
• Over-sudsing
• Internal seal damage

Leak errors should be inspected promptly to avoid floor and electrical damage.

Suds & Detergent Warnings

SUD / 5D

Too much foam detected.

Tip from technicians:

Always use HE detergent and reduce quantity—more soap does not mean cleaner clothes.

Power & Communication Errors

AE / AC / 13E

Control board communication failure.

PF

Power interruption or voltage instability. Expert Samsung washer repair is necessary to prevent complete system failure due to recurring electrical faults.

Washer Shows No Error Code

Certain older models use indicator lights to convey issues. These signals can be precisely decoded by a qualified Samsung washer repair specialist.

Resetting Your Samsung Washer

A reset may clear temporary faults:

• Unplug for one minute
• Restore power
• Restart cycle

If the error reappears, the issue is mechanical or electrical.

When Samsung Washer Repair Is Necessary

Call a professional if:

• The washer won’t drain or spin
• Water leaks continue
• Electrical errors persist
• Error codes return after reset

Delaying repairs can increase damage and repair costs.

Need Samsung Washer Repair?

Every day, our professionals diagnose Samsung washing machines and fix problems correctly the first time. Professional Samsung washer repair guarantees dependability and safety from drain pump malfunctions to control board mistakes.

Final Note

Error codes for Samsung washers are made to safeguard your device. By taking care of them early on, you may prolong the life of your washer and avoid costly malfunctions, whether through professional Samsung washing machine repair or appropriate troubleshooting